I've made 2 Kentucky bags so far and although they take a while to sew, they are worth it in the end! There are a total of 4 zippered pocket in this bag. There are 2 exterior pockets: 1 under the flap and 1 on the back.
|Zippered pocket under the flap|
|Zippered pocket on the back exterior|
And 2 additional zippered pockets inside the bag.
The exterior and interior shells are constructed exactly the same way except for the twist lock you add on one exterior zippered pocket.
There are many pieces to cut, interface and assemble to put together all of these pockets. I really loved the accent strip on the bottom of the flap but I was not able to use faux leather as I wanted to with the first bag because it was way too bulky so I ended up using yarn dyed essex linen instead.
With the 2nd bag, I figured out how to use faux leather. I just cut one strip of non-fraying faux leather and removed what would be the 1/2 inch seam allowance on the pattern piece and topstitched it to the bottom of the flap. It worked great and there was no bulk at the seams.
The only thing I did not like about the bag is again the 1/2 inch seam allowance. This is a personal preference for me but I do not like having to watch that little mark on my sewing machine. I like to sew with a 3/8 inch seam allowance - which is essentially the edge of my presser foot - because I can then focus on the quality of my stitching.
This is also not an inexpensive bag to make. The cost of 4 zippers plus the twist lock and metal hardware for the strap and all of the interfacing used makes this a more expensive project. But again, the results are worth it!